Motorola HPD 1000, User Manual

Page: 8 / 34

2
Getting Started
Software Installation and Setup
Important Installation Information for HPD Status
Applet
Do not plug in the modem before installing the HPD Status
Applet. If this is done, the HPD modem will fail to install
properly.
System Requirements : Windows XP Service Pack 1 or Windows
2000 Service Pack 3.
Installation criteria :
1 Install .Net 1.1 Common Language Runtime (CLR). If this
is not installed, the HPD Status Applet Installation will
install it on your machine automatically.
2 Microsoft .NET Framework 1.1 Service Pack 1
(NDP1.1sp1-KB867460-X86.exe) must be installed, which
is included on the CD. This can only be installed
AFTER
.Net 1.1 CLR is installed. If the Service Pack is not
installed when you attempt to install the Status Applet, the
installation will stop and inform the user to install the
Service Pack.
3 Ensure SNMP is installed and running:
• Open "Services" (found under Administrative Tools) to
make sure SNMP Trap Services installed properly and is
running with "Automatic" startup type.
• If SNMP Trap Service is not installed, it must be installed
using Add/Remove Windows Components. The actual
component that the user needs to install is the Simple
Network Management Protocol, which can be found
under “Management and Monitoring Tools. This will
usually prompt the user to insert a Windows XP CD.
!
96C67_Text.book Page 2 Monday, February 20, 2006 5:19 PM