Motorola HC700-i F3130A, User Manual

Page: 43 / 57

31
the barcode it appears larger. Barcode symbols with
dense symbol elements should be read closer to the
HC700-i while large barcodes with larger symbol ele-
ments should be read at a larger distance (Depth-of-
Field) from the HC700-i.
To capture a barcode, aim the green aiming bar at any angle
across the barcode symbol, as shown in Figure 9
Note: When adjusting your position, you may move back
and forth from the target to capture the entire object - a suc-
cessful scan is indicated by a beeping sound.
Calibrating the Touch Screen
To calibrate the touch screen - hold down the <SHIFT> and
<SP> and <C> keys and follow the calibrate application
instructions to complete your touch screen calibration.
Resetting the HC700-i
You may need to reset the HC700-i; for example, you may
need to reset due to communication cut-off, or if the operat-
ing system or the application stops responding.
If the HC700-i stops responding, perform the steps described
on the following page.
Figure 9. HC700-i Imager - Barcode Capture Positions
2D Barcode Symbol
1D Barcode Symbol
Enhanced IMD Users.book Page 31 Tuesday, September 26, 2006 2:17 PM