manualshive.com logo in svg

Motorola HC700-i F3130A, User Manual, Page: 38 / 57

Share
Download
Motorola HC700-i F3130A User Manual Download Page 38

26

Bluetooth Connection

Turning on/off

Ensure that the two devices are within 10 meters from each 
other and that both Bluetooth-enabled devices are discover-
able. Note that in In Flight mode, Bluetooth is turned off.

1.

Tap 

Start Menu -> Settings -> System

 tab.

2.

Tap Bluetooth Enable/Disable icon.

3.

Press the OK button to turn on the Bluetooth

Create a Bluetooth link (partnership) 

You can create a link between your HC700-i and another 
remote device. The link enables to transmit information 
between the two devices. Ensure that the two devices are 
turned on, discoverable, and within 10 meters.

1.

Tap 

Start Menu -> Settings -> System

 tab.

2.

Tab the Bluetooth Monitor icon

3.

Tap 

Device -> Find Devices

. Your device searches for 

other remote devices, and displays them on the screen.

4.

Tap 

Device -> Trust this Device. 

Enhanced IMD Users.book  Page 26  Tuesday, September 26, 2006  2:17 PM

Summary of Contents for HC700-i F3130A


























































Reviews:

No comments