Motorola HC700-i F3130A User Manual Download Page 14 | Manualshive

Page: 14 / 57

Motorola HC700-i F3130A User Manual Download Page 14

2

10/100 base T interface via multi-slot communication cra-
dles. The HC700-i can also communicate through a built-in
IrDA port.

The HC700-i is equipped with a QVGA 3.5 inch transflective
TFT display, built to withstand high impact. Display backlight
is designed to enable clear screen visibility under varied light
conditions.

A touch-screen enables easy on-screen menu navigation, in
addition to using keypad navigation. The keypad uses an
adjustable backlight illumination, designed for low-light
working conditions.

The HC700-i is powered by an 1800 mAh 7.2V Lithium-Ion
battery pack. The battery is fully recharged within four hours
when the HC700-i is docked in a cradle.

A drained battery can be replaced without data loss from the
HC700-i memory ("hot swap"). A built-in power source, inde-
pendent of the battery pack, maintains the data in the HC700-
i memory for at least 30 minutes until a fresh battery is
placed.

The HC700-i may use a line of Motorola docking cradles for
network communications and power charging.

The personal desktop cradle is designed for office use of the
HC700-i. The 8 and 4 slot charging/communication cradles
provide multi-slot docking in large operations. The vehicle
cradle is used for the mobile applications of the HC700-i, by
allowing charging while driving.

For detailed installation and operation of each cradle, refer to
the specific user manual of each cradle.

Unpacking

The HC700-i basic package includes the following items:

•

HC700-i

•

1800 mAh 7.2V Lithium-Ion battery pack

•

Tethered Stylus

•

Hand-strap

Enhanced IMD Users.book Page 2 Tuesday, September 26, 2006 2:17 PM

«
...
12
13
14
15
16
...
»

Summary of Contents for HC700-i F3130A


























































Reviews:

No comments