24
English
G
ET
T
IN
G
S
T
A
R
T
ED
Turn the rotary knob (1) clockwise or
counterclockwise until you reach the desired
channel indicated on the display.
Method 2
Method 3
Note:
The keypad can’t be used to enter the channel
number during a call or whilst the radio is in a scan.
Sending a Call
1.
Select the desired radio channel.
2.
Press the
PTT
button and speak clearly into the
microphone.Your mouth should be 2.5 to 5 cm
away from the microphone.
3.
When transmitting, the red indicator will light
continuously.
4.
Release the
PTT
button to listen.
Your radio may be configured for ‘Transmit Inhibit’
under certain conditions (e.g. when the channel is in
use by others) in which case, the channel busy tone
will sound when you press the PTT or call button to
indicate that transmission is inhibited.
When the channel is free, the Channel Free beep
will sound, and you can make a call.
If your radio is equipped with a transmit time out
timer (TOT), a warning tone
will
sound a few seconds before the transmission is cut
off. Your radio may be programmed to inhibit
retransmission within a preset time.
1
+
or
e
until:
or
2
c
to confirm your selection.
Display shows:
(for 2 seconds)
1
Enter the desired
channel number
from the keypad,
e.g. 05:
2
c
to confirm your selection.
Display shows:
(for 2 seconds)
