background image

 

6

 

English

RADIO OVER

VIE

W

Programmable Buttons

 

Your radio has two programmable buttons. Your 
dealer can program these buttons as shortcuts 
to various radio features.

Check with your dealer for a complete list of 
functions your radio supports.

Programmable buttons include the 

 

g

 

 and 

 

h

 

 buttons (see page 3).

These buttons can access up to two features, 
depending on the type of button press:

short press—quickly pressing and releasing 
the programmable buttons

long press—pressing and holding the 
programmable buttons for a period of time 
(default 1 1/2 seconds or programmed 
value)

hold down—pressing and holding down the 
programmable buttons while checking 
status or making adjustments

A summary of programmable radio features 
and corresponding page references appear 
beginning on page 7.

In the “Button” column, have your dealer record 
the name of the programmable button next to 
the feature that has been programmed to it.

The dealer can use the abbreviations (P1, P2) 
shown in the radio illustration on page 3.

Also, where appropriate, have your dealer 
indicate whether the button press requires a short 
press, a long press, or needs to be held down.

 

Push-to-Talk (PTT) Button

 

Press and hold down this button on the 
microphone to talk (transmit); release it to listen.

 

Microphone

 

Hold the microphone 1 to 2 inches (2.5 to 
5 cm) from your mouth, and speak clearly 
into it.

 

Use with Enhanced Keypad Microphone 
(RMN5029) 

DTMF Keypad

Programmable
Buttons
(A, B, C)

 

#English.book  Page 6  Friday, April 18, 2003  2:22 PM

Summary of Contents for GM3188





















Reviews: