7
4
BASIC
OPERATIONS
4.1
Switching the phone ON and OFF
To turn on your phone
:
1.
Make sure the switch in the back of the phone is moved to the ON side
2.
Press and hold
“End key”
for a few seconds or until the display turns on.
After the phone is registered in network, the signal will be displayed at the top left corner of the screen. The
phone is now in the standby state and you can make or answer a call. Your phone remains in a searching state if it
fails to find the available network.
To turn off your phone,
1.
Press and hold
“End key”
for three seconds until the phone turns OFF
2.
Slide the power switch in the back of the phone to the OFF side.
Note: If you switch off the phone by taking off the battery, some information stored in the phone may possibly
get lost, which may be an inconvenience.
4.2 Making a call
1.
Raise your receiver or press the “
Hands free Key
” I
2.
Input phone number which you want to call.
The key
is used for deleting the last digit of the number. Press and hold it to clear all the entry and return
to standby screen.
If the dialed number is stored in the phonebook, then the name of the called party will be displayed on the screen.
To end a call, you can press the
“End Call”
. After a call is ended, the call timer stops and the text “Call ends” is
displayed on the screen.
4.3 Saving a number by dialing
You may save the other party’s number with phonebook, or by dialing under standby state. The number saving
procedure of the former method is described in details in the phonebook section.
Specific steps for saving a number by dialing under standby state are as follows:
1. Input the other party’s phone number under standby state.
2. Press the left and right-direction key to perform function selection.
3. You may save this number as:
