Motorola FR68 Series User Manual Download Page 116

Page: 116 / 142

Accessories

114

Charging the FR68 Series Battery

Connect the cradle to power. Insert the FR68 Series into the slot to begin charging.

NOTE

Insert the adaptor module into the cradle before inserting the FR68 into the cradle..

* It is recommended that this product be charged for 24 hours before the first use to ensure that

the internal battery is fully charged.

Figure 8-1

FR68 Series Battery Charging

Charging the Spare Battery

Spare Battery

Figure 8-2

Spare Battery Charging

Battery Charging Indicators

The Single Slot USB/Serial Cradle charges the FR68 Series’ main battery and a spare battery
simultaneously.

The FR68 Series’ charge LED indicates the status of the battery charging in the FR68 Series.
See

Table 1-2 on Page 20

for charging status indications.

The spare battery charging LED on the cradle indicates the status of the spare battery charging in
the cradle. See

Table 6-1 on Page 115

for charging status indications.

Summary of Contents for FR68 Series















































































































































Search results

Summary of Contents for FR68 Series

Reviews:

Brands by name

Popular brands

Motorola FR68 Series, User Manual

Search results

Summary of Contents for FR68 Series

Reviews:

Brands by name

Popular brands