11
Visual indications of Power Button/Status LED
The Power Button/Status LED has a 3 color LED (red/yellow/green) to indi-
cate the power, battery and charging status (see Figure 1).
The LED indications differ when the IMD is used out of the cradle and
inside the cradle.
LED indications when IMD is out of the cradle
LED
slowly blinks green
- IMD in Suspend mode.
LED shows
steady
red
for 5 seconds
- IMD is booting-up following bat-
tery replacement.
Important:
to avoid system failure, do not remove the
battery during boot-up.
LED Indications When IMD is in the cradle
LED shows
steady red
- battery is charging.
LED shows
steady green
- battery is fully charged.
LED
blinks
yellow
- battery temperature or voltage is out of range - bat-
tery charging is stopped. Charging will resume when temperature or volt-
age is back within range.
LED
blinks
red
-
charging error/bad battery. Re-install the IMD in the cra-
dle or replace battery.