Motorola DLR1060, User Manual

Page: 54 / 193

NOTICE:
Direct Call times out after 10 seconds of inactivity
(no transmissions detected). Voice prompts “Private
Over” are heard by both users involved in the
private call.
Top button must be pre-programmed to Direct Call
Feature. For Direct Call feature to be enabled in the
radio Advanced Configuration, a radio ID must have
been uploaded into the radio via CPS. Radio plays
voice prompt of Direct Call Name. If no name is
programmed, radio announces radio private ID
number. For more information, refer to
Customer
Programming Software on page 68 .
Private Reply and Direct Call
Frequently Asked Questions
1 Question: If I change my mind and want to exit the
request for Private Call (or I pressed the
Top button by
mistake), how do I get out of the “private queue” status
(Radio
Top button LED indicator is blinking orange)?
Answer: Long press the Top button. The radio exits the
private queue request and the Top button LED indicator
turns off, returning you to radio normal status.
2 Question: What happens if two people (for example user
A and C) press their
Top button at the same time to
Private Reply or Direct Call User B?
Answer: Pressing the Top button only queues the radio
B ID; therefore, there is no issue if two people press the
Top button at the same time. The issue occurs when
these two people press the PTT button at the same time
to talk privately to B. Then, whoever presses the PTT
button faster gets to talk privately to B. The other user
hears a “busy” or rejection tone.
3 Question: What happens if a person Private Reply or
Direct Call User B, but User B does not want to engage
in the Private conversation?
Answer: The nature of the radio communication is to
allow instant communication without the option to
decline radio calls. Therefore, if you are concerned
about users disrupting group communications or
misusing the Private Reply or Direct Call features, make
sure that these features are enabled only on authorized
radio users.
4 Question: I pressed the Private Reply button but nothing
happened (for example,
Top button LED indicator did
not start blinking) and instead the radio gives out a busy
tone.
English
54