Motorola DLR1020, User Manual

Page: 105 / 118

English
103
TR
OUBLESHOOTING
TROUBLESHOOTING
Symptom Try This...
No Power
Recharge or replace the Li-Ion battery.
Extreme operating temperatures may affect battery life.
Refer to “About the Li-Ion Battery” on page 12
Unable to read the radio
(using the CPS)
Make sure that one side of the programming cable is connected to the radio
and the other side of the programming cable is connected to the USB port.
Verify that the switch on the programming cable is set at “
Digital ” position (or
“ Flash ” position in older version programming cable). Make sure the radio is
positioned correctly inside the SUC (radio making proper contact with the
charger).
Radio generates continuous
tone when PTT is pressed
Radio does not transmit when it is receiving as receive mode has higher priority
than transmit mode. Press the PTT button again when receive mode ends.
Refer to “Transmitting and Receiving” on page 27.
Radio does not transmit when
pressing the radio PTT button
The radio does not transmit if there are other users who are using the channel.
Try again after making sure nobody else is talking. By default, the PTT button is
disabled on the radio whenever there is an earpiece connected to it. Make sure
to use the earpiece in-line PTT button to transmit instead.