Motorola DLR1020, User Manual

Page: 103 / 118

English
101
CLONING
• Press and release the (-) button and the
Source Radio will announce “ Wireless ”.
2. Power the Target radio following the sequence
below:
• Press the PTT button and the (-) button
simultaneously while turning the radio
ON.
• Wait for 3 seconds before releasing the
buttons until the audible tone and voice
announcement “Clone Mode Serial” are
heard.
3. On the Source radio, press and release the (+)
button to start the wireless PROFILE ID
Number cloning. The radio generates an
audible tone.
4. After cloning is completed, the Source radio will
announce either “ pass ” (cloning is successful)
or “ fail ” (cloning has failed).
5. On the Target radio, the radio receives the
PROFILE ID Number information. The Target
radio will announce either “
pass ” (cloning is
successful) or “ fail ” (cloning has failed).