Motorcycle Installation
47
Speaker Installation and Connection
Introduction
The MTM300 ships standard with the external speaker. The speaker is supplied with two
wires to be mounted on the Junction box terminal.
Speaker Installation
1.
Ensure that the place where you are going to install the speaker is within user’s reach
and that the speaker will not obstruct vehicle operation.
2.
Loosen the two wing screws of the trunnion bracket and remove the speaker.
3.
Using the trunnion bracket as template, mark the locations of the three mounting
holes.
4.
Centerpunch and drill a 4 mm Ø hole at each location.
5.
Mount the trunnion bracket with the screws supplied (see Figure 52).
6.
Insert the speaker into the trunnion bracket and tighten the two wing screws.
Figure 52 Example of Mounting Speaker Trunnion in Motorcycle Box
Speaker Connection
Connect the pins of the wires to the junction box terminals 1 and 2.
Figure 53 Speaker Connection
TRUNNION BRACKET
INTERNAL MOUNTING PLATE
JUNCTION BOX TERMINAL
EXTERNAL
SPEAKER
SPEAKER
