Dash Mounting
11
9.
Install the power cable (see page 12). Cut the power supply cable to the desired
length and plug the power cable into the radio power connector (see Figure 8).
10.
Route other accessory wires to appropriate locations in the vehicle and connect them
to their respective accessories. (For connecting the ignition sense cable, refer to
page 18.)
11.
Mount the microphone clip to a convenient spot near the radio.
12.
Plug the microphone into the connector on the radio front panel.
13.
Attach the S-hook and crimp (on microphone cable) to the hole on the radio
trunnion.
Figure 8 Connections to Radio
Optional HLN6372 Keylock Installation
To install optional Keylock HLN6372 (see Figure 9), proceed as follows:
1.
Place the two keylocks on each side of the mounting trunnion to cover the two wing
screws holding the radio.
2.
Secure the keylocks with the lock key.
Figure 9 Optional Keylock Installation
Antenna
Connector (BNC)
To
via Fuse (F1)
(Red)
Power Connector
Vehicle Chassis Ground
(Black)
Wing Screw
Key
Lock
Keylock
Mounting
HLN6372
Trunnion
