background image

24

Calls lists

14.  Calls lists

If you have subscribed to a Caller ID service, and provided the identity of the caller is not 

withheld, the number of the caller will be displayed together with the date and time of the 

call (if provided by the network). When the list is full and a new call is received, the oldest 

non VIP entry will be deleted automatically. 
You can store at least 30 numbers in the received calls list and each number can be up to 

16 digits long.

NOTE

If you receive a private call 

---P---

 will show on the display. 

If you receive an out of area call 

---O---

 will show on the display. 

If you receive an error call 

---E---

 will show on the display.

14.1    Enter the Received calls list

1.  Press 

c

 or 

d

 to enter the Received calls list.

2.  Continue pressing to scroll through the list.
3.  The display will show 

--E

n

d-- 

when you reach the end of the list.

14.2    Dial a number from the Received calls list

1.  Press 

c

 or 

d

 to enter the Received calls list.

2.  Continue pressing to scroll to the number you want to dial.
3.  Either lift the handset to dial automatically, or press 

g

 to dial over hands-free.

14.3    Enter the Redial list

The last 5 entries dialled are stored in the phone; these can be up to 32 digits long. 
1.  Press 

b

 

to enter the Redial list.

2.  Continue pressing to scroll through the list.

14.4    Dial a number from the Redial list

1.  Press 

b

.

2.  Continue pressing 

b

 to scroll to the entry you want.

3.  Press and hold 

b

 to scroll through the numbers quickly.

4.  Lift the handset to dial the number automatically or press 

g

 to dial the displayed 

entry over hands-free.

NOTE

If you have more than one missed call from the same number 

, will show on the 

display.

Summary of Contents for CT202

































Reviews: