background image

21

General information

12.  General information

IMPORTANT

This product is intended for connection to analogue public switched telephone networks 

and private switchboards in Singapore.

Important safety instructions

Follow these safety precautions when using your phone to reduce the risk of fire, electric 

shock, and injury to persons or property:
•  Do not set the phone on a heating register or over a radiator. Ensure that proper 

ventilation is provided at the installation site.

•  Do not use while wet or while standing in water.
•  Do not use this product near water (for example, near a bath tub, kitchen sink, or 

swimming pool).

•  Do not disassemble this product. If service or repair work is required, contact the 

customer service helpline found in this User Guide.

•  Avoid using during an electrical storm. Use a surge protector to protect the 

equipment.

Installation Guidelines

•  Read and understand all instructions and save them for future reference.
•  Follow all warnings and instructions marked on the product.
•  Do not install this product near a bath tub, sink, or shower.
•  Do not place this product on an unstable cart, stand, or table. This product may fall, 

causing serious damage to the product.

•  Adjust only those controls that are covered by the operating instructions. Improper 

adjustment of other controls may result in damage and will often require extensive 
work to restore the product to normal operation.

Cleaning

•  Clean the handset and base with a damp (not wet) cloth, or an anti-static wipe.
•  Never use household polish as this will damage the product. Never use a dry cloth as 

this may cause static shock.

Environmental

•  Do not expose to direct sunlight.
•  Do not place your product on carpets or other surfaces which generate fibres, or place 

it in locations preventing the free flow of air over its surfaces.

•  Do not submerge any part of your product in water and do not use it in damp or humid 

conditions, such as bathrooms.

•  Do not expose your product to fire, explosives or other hazardous conditions.

Summary of Contents for CT2





























Reviews: