PXE Boot
http://www.motorola.com/computer/literature
2-3
2
4. Save changes and exit Setup. The board will reboot.
5. Enter Setup again, using either <F2> or the S key.
6. Choose Boot Order from the main Setup menu.
7. Under BOOT DEVICE PRIORITY select the First Boot Device
option and press the Enter key.
8. Choose IBA GE Slot XXYZ, where XXYZ is the PCI
identification of the network controller to boot from.
There may be 1, 2 or 3 choices. If there is only one choice, this is
the management (front panel or RTM) port. If there are two or
more choices, two will have the same XX value. These are the
backplane 2.16 ports, the other is the management port. For the
2.16 interfaces:
Z = the port # (0 or 1)
Port 0 connects to switch 1 and port 1 connects to switch 2
9. Save changes and exit Setup. the board will reboot.
Once the board completes POST it will boot to the PXE server. When the
boot is successful the PXE server menu will appear on the screen.
