Motorola CP 140, Basic User'S Manual

Page: 17 / 292

15
English
S
CAN
SCAN
You can monitor multiple channels and receive any
calls that are transmitted on them. Channels can be
programmed into a scan list by your dealer. Your
radio automatically switches to a scan list channel
when it detects activity on it.
STARTING OR STOPPING SCAN
The LED indicator blinks green during a scan
operation and stops blinking when the radio
switches to a channel.
You can start or stop a scan operation by
:
TALKBACK
If the Talkback option is preprogrammed, you can
respond to any calls received during the scan
operation. To respond, press the
PTT button before
the programmed hangtime elapses. Otherwise, the
radio will continue scanning. Check with your dealer
for details.
DELETING A NUISANCE CHANNEL
Note: Your dealer must have preprogrammed a
button to Nuisance Delete to access this
feature.
If a channel continually generates unwanted calls or
noise (a “nuisance” channel), you can temporarily
remove it from the scan list:
Note: You cannot delete a priority channel or the
last remaining channel in the scan list.
1 To start or stop a scan operation, press the
preprogrammed Scan button.
- or -
2 Select a channel that has been
preprogrammed by your dealer to start Auto
Scan.
Note: You do not need to press a prepro-
grammed
Scan button.
3 Select a channel that has not been
preprogrammed by your dealer to stop Auto
Scan.
1 While the radio is on the Nuisance Channel,
press the preprogrammed
Nuisance
Channel Delete button until you hear a tone.
2 Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
CP040_EN.fm Page 15 Thursday, October 2, 2003 10:53 AM