Motorola CP 140, Basic User'S Manual

Page: 14 / 292

12 English
GE
TTING
S
T
AR
T
E
D
SENDING A CALL
RECEIVING A CALL
MONITORING
It is important to monitor traffic before transmitting to
ensure that you do not “talk over” someone who is
already transmitting.
1
Turn your radio on.
2
Use the
Channel Selector
knob to select the
desired channel.
3
Hold the radio in a vertical position, press the
PTT
, and talk at a distance of about
2.5 to 5 cm from the microphone.
4
Release the
PTT
to listen.
1
Turn your radio on.
2
Adjust the radio’s volume.
3
Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT
, and talk at a distance of about
2.5 to 5 cm from the microphone.
1
Press and hold the preprogrammed
Monitor
button to access channel traffic.
2
Once channel traffic has cleared, proceed
with your call by pressing the
PTT
button.
3
A long press of the preprogrammed
Monitor
button places the radio in Sticky Permanent
Monitor mode.
•
You hear a high-pitched tone.
A short press of the
Monitor
button cancels
Sticky Permanent Monitor mode and returns
the radio to normal operation.
CP040_EN.fm Page 12 Monday, November 10, 2003 9:16 AM