13
ENGLISH
Using the Baby Monitor
3. Using the Baby Monitor
3.1
Setting Up
Place the Baby Unit in a convenient location (e.g. on a table) and
point the camera lens towards the area you want to monitor.
Adjust the angle of the Baby Unit's camera until you are satisfied
with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is inter-
ference with the picture or sound, try moving the units to di
ff
erent
locations, and ensure they are not close to other electrical equipment.
3.2
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor on the top of the
Unit detects a low level of ambient light, the LEDs will automatically
activate and the screen on the Parent Unit will display in black and
white. The
icon will be displayed at the top of the screen.
3.3
Talk Mode
Press and hold the TALK button
T
on the Parent Unit to talk to your
baby through the Baby Unit’s loudspeaker.
The
T
icon will be displayed at the top of the LCD screen.
3.4
Digital Pan and Tilt
The camera image can be remotely controlled from the Parent Unit
when in a camera viewing mode.
1. Press the
+
UP button or
-
DOWN button to move the image
from Camera Unit upward or downward.
2. Press the
<
LEFT button or
>
RIGHT button move the image
from Camera Unit towards the left or right.
3.5
Video ON/OFF
Press
V
VIDEO On/Off button to turn the LCD screen on or off,
whilst still leaving the audio monitor on.
