Motorola CM300 Commercial Series, User Manual

Page: 36 / 68

34
English
PHONE
MAKE A PHONE CALL
D
Press the preprogrammed Phone button (see
page 14), and skip to step 6.
– or –
Press the PTT button, and if the Hot Keypad
feature has been preprogrammed by your
dealer/programmer, do the following:
5 Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access code to the repeater.
Immediate Auto – automatically sends the
access code.
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
Manual - Enter your access code using the
DTMF microphone keypad and press the PTT
button.
6 Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press and hold the PTT but-
ton to talk. Release the PTT button when the
other party wants to talk, both parties will
need to speak in turn.
7 To disconnect a phone call, do one of the
following:
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 8.
– or –
Enter the deaccess code using the DTMF
microphone keypad and press the PTT but-
ton.
8 To exit Phone Mode:
Press the preprogrammed Phone button (see
page 14).
– or –
Press and hold
C
to disconnect the call.
Note:
D
disappears from the display.
1
G
or
H
to select a channel that has been
programmed for telephone.
2
D
to enter menu mode.
3
G
or
H
until
4
D
to select
PHONE
PHONE
05_Phone.fm Page 34 Friday, July 11, 2003 11:32 AM