T
a
lking an
d Rece
ivin
g
23
6. To transmit, speak into the accessory microphone. To receive, stop talking.
To disable VOX operation, press
Push to Talk
or remove the audio accessory.
Note:
To order accessories, visit
www.motorola.com/radios/professional
,
call 1-800-448-6686, or contact your point of purchase.
Setting the VOX Sensitivity
You can adjust the sensitivity of your radio’s accessory or microphone during VOX
operation to suit different operating environments. These menus appear only when
the VOX feature is in use, which is indicated by
g
.
1. Press
S
until
g
displays. The radio displays
H
when you are
setting the external VOX (with audio accessory).
2. Press
[
or
]
to select the sensitivity level:
Locking the Keypad
You can lock the keypad to avoid accidentally changing your radio settings.
1. Press and hold
S
for 3 seconds.
2. To unlock, press and hold
S
for 3 seconds.
0
= Off
1
= Low
2
= Medium
3
= High
020995o
External VOX
T
a
lking an
d Rece
ivin
g
24
Monitoring a Channel
Monitoring allows you to check for activity on a channel.
1. Press and hold
T
. If the channel is clear to use, you will hear
static and
w
and
0
will display.
2. Press
T
again to stop monitoring.
Scanning (CLS1410 Only)
You can scan up to 4 channels and frequencies. When the radio
detects activity, it stops scanning and locks in on the active channel. This allows you
to talk and listen to the person transmitting without changing channels.
1. To start scanning, briefly press
T
.
The scan icon
h
displays and the radio begins to scan the channels. When the
radio detects activity, it stops on that channel and displays
w
and the channel
number.
2. To talk to the person transmitting without switching channels, press
Push to Talk
within 5 seconds. If no transmission occurs within 5 seconds, scanning resumes.
3. To stop scanning, briefly press
T
.
If you press
Push to Talk
while the radio is scanning, the radio transmits on the
channel you were on before you started scanning.
