Motorola CLIPON ORGANIZER, Manual

Page: 31 / 81

31 Setup and product care 31
3
Chapter 3
Setup and
product care
Getting connected
To set up your StarTAC Clip-On Mobile Organizer for
synchronization, you will need to:
1
use the cable included with your purchase and connect it to
your computer, and
2
connect the StarTAC Clip-On to your telephone.
These steps are described below. (For details on system
requirements, please read “Requirements” on page 36.)
To connect the Clip-On to your computer:
1
Connect the cable to the Clip-On and your computer.
2
You should hear a connection tone.
.
To connect the Clip-On to your telephone:
1
The Clip-On uses the auxiliary battery connector on the
back of the phone. Insert the spring clip on top of the Clip-
On into the connector, and pull it down (the clip is spring-
loaded).
2
Insert the connector on the bottom of the Clip-On into the
connector on the StarTAC telephone.