manualshive.com logo in svg

Motorola C200, Service Manual, Page: 10 / 156

Share
Download
Motorola C200 Service Manual Download Page 10

10

 

      May 19, 2003 

6809464A5-O

Product Overview

Product Family D10

PRELIMINARY

Product Overview

Motorola C200 mobile telephones feature global system for mobile communications 
(GSM) air interface. The C200 also provides a wireless application protocol (WAP) 
Internet browser. The C200 telephones incorporate a new user interface (UI) for 
easier operation, allows short message service (SMS) text messaging, and includes 
personal information manager (PIM) functionality. It is a dual-band phone that 
allows roaming within the GSM 900 MHz and digital cellular system (DCS) 1800 
MHz bands. C200 telephones support SMS in addition to traditional circuit 
switched transport technologies. 

C200 telephones are made of a polycarbonate plastic. The display and speaker, as 
well as the keypad, transceiver printed circuit board (PCB), microphone, external 
accessory connector, volume buttons, power button, and voice button, are contained 
within the candy bar form-factor housing. The phone accepts

 

both 3V and 5V

 

mini 

subscriber identity module (SIM) cards which fit into the SIM holder

 

underneath 

the battery. The antenna is built-in to the endo skeleton housing assembly.

Features

C200 telephones use advanced, self-contained, sealed, custom integrated circuits to 
perform the complex functions required for GSM communication. Aside from the 
space and weight advantage, microcircuits enhance basic reliability, simplify 
maintenance, and provide a wide variety of operational functions.

Features available in this family of telephones include:
• Ergonomic design for comfort and enhancement of one hand operation
• Icon Based Simplified User Interface
• Animated Screen Savers
• Lower voltage technology that provides increased standby and talk times
• Extended GSM (EGSM) channels
• Tri-coder/decoder (CODEC) that allows full rate, half rate, and enhanced full 

rate modes of transmission

• Supports SMS, concatenated SMS, and cell broadcast messages
• WAP 1.1 compliant

• 700  mm

2

 98 x 64 pixel, high resolution 4 line graphic display

• Icon based simplified user interface
• Display zoom
• Display animation
• VibraCall® vibrating alert
• Voice recorder personal memo feature
• Voice activation for phone book entries and menu shortcuts
• Simplified text entry using iTAP™ predictive text entry
• Supports calling name presentation
• Supports call forwarding for incoming voice, fax, and data calls
• Supports 3V and 5V SIM cards
• SIM Toolkit (STK), Class II

Summary of Contents for C200





























































































































































Reviews:

No comments