Disassembly
C113
22
December 6, 2005
Removing and Replacing the Vibrator Motor
1.
Remove the back housing as described earlier.
2.
Gently pry up the vibrator motor on the inside of the back housing then remove it.
Figure 15. Gently pry up the vibrator motor on the inside of the back housing
3.
To replace it, gently insert the vibrator into the slot, then press down until is sits firmly in
the back housing.
4.
Restore the back housing and other parts.
Removing and Replacing the Antenna Module
1.
Remove the back housing as described earlier.
2.
Gently off the antenna module from the Transceiver board.
Figure 16. Gently off the antenna module from the Transceiver board
3.
To replace it, gently snap the antenna module into place on the Transceiver board.
4.
Restore the back housing and other parts.
