Remote Control
12
Chapter 3
Remote Control
The Moxi remote control allows you to access, control, and enjoy the
many features of your BMC9012. You can also use this remote control
as the primary remote control for many brands of TVs and audio
devices. Instructions in this chapter show you how. Refer to the
accompanying
Viewer Guide
for explanations of the buttons.
1, 2
Figure 9: Moxi remote Control
Programming Procedure
The Moxi remote control will operate the BMC9012, and once
programmed, will simultaneously control the
power
,
volume
, and
mute
functions of your TV or audio receiver. Use the following instructions to
program the remote control.
From the tables on the following pages, find the code(s) for your brand
of TV or audio receiver and use this information with the “Programming
by Code” procedure below. However, if your brand is not listed, or the
given codes do not work, then go to “Programming by Search”
procedure on page 13.
Programming by Code
1.
Turn on the TV or receiver that you want to control.
2.
On the remote control, press and hold the
MOXI
and
OK
buttons
simultaneously until the LED light on the top blinks twice.
3.
Enter one of the device codes from the reference tables and press
OK
. The LED will blink
twice. (If the LED blinks once, the code was invalid—try again.)
4.
Press the
Power
button on the remote to test device control. If the device does not respond
try a different code, by starting again from
step 3
. Repeat until successful, or go to the next
procedure.
Note
To factory reset the remote, type code
9 9 9 9
and press
OK
in
step 3
above.
1
Your cable operator may provide a different remote control. If yours doesn't look like the one pictured here, please refer
to the manual provided with your remote control.
2
Use only high quality, non-corrosive batteries designed for use in electronic equipment.