Figure 1:
(1) The power status indicator.
LED Indicator
Description
Off
Power is not connected.
Green
Power is supplied.
Flashing green
The firmware update is being applied to the power supply unit.
Flashing green then turns off
The redundant power supply is mismatched. This only occurs if
you have a secondary redundant power supply installed.
Flashing orange
There is a problem with the power supply.
Network Link Status Indicators
When the recorder is connected to the network, the recorder’s connection status LEDs above the Ethernet
port display the recorder’s connection status to the network. The following table describes what the LEDs
indicate:
Figure 2:
(1) Link LED. (2) Connection activity LED.
LED Indicator
Description
Off
The recorder is not connected to a network.
Link LED — green
Connection Activity LED — blinking
green
The recorder is connected to a network at the maximum port
speed.
Link LED — orange
Connection Activity LED — blinking
green
The recorder is connected to a network at less than the
maximum port speed.
Link LED — green
Connection Activity LED — off
The recorder is connected to a network at the maximum port
speed and data is not being sent or received.
Link LED — orange
The recorder is connected to a network at less than the
Network Link Status Indicators
16
