o
Power over Ethernet (PoE) Class 3 — If PoE is available, the camera LEDs will turn on.
o
External Power — Connect an external 12 V DC or 24 V AC power source through the brown
and blue auxiliary power cables.
Important:
Be careful not to connect power to the audio input cable, doing so will
permanently damage the camera. Both the audio input cable and auxiliary power
cable are brown. To distinguish the auxiliary power cable, it is labeled
AUX PWR
and
has a thicker gauge.
5. Check that the Connection Status LED indicator indicates the correct state. For more information, see
Connection Status LED Indicator
.
Wall Mount Installation Option
For a more permanent and less obtrusive thermal camera installation, you can mount the camera to a wall so
that it is positioned in front of the elevated temperature detection subject and the blackbody. For more
information, see
Installing the Mounting Bracket
If the cables for the camera will not be provided from inside the mounting surface, install the junction box
first (H4-BO-JBOX). It is highly recommended that the junction box be used if you will be installing the camera
with auxiliary power or external digital inputs and outputs.
After you install the junction box, you can skip directly to step 3 of this procedure.
Wall Mount Installation Option
13
