background image

16 

VIP2500 Series High-Definition U-verse Receiver Installation Manual

Copyright © 2012 Motorola Mobility, LLC. All rights reserved. No part of this publication may be 

reproduced in any form or by any means or used to make any derivative work (such as translation, 

transformation, or adaptation) without written permission from Motorola Mobility, LLC.

Motorola reserves the right to revise this publication and to make changes in content from time to time 

without obligation on the part of Motorola to provide notification of such revision or change. Motorola 

provides this guide without warranty of any kind, either implied or expressed, including but not limited 

to the implied warranties of merchantability and fitness for a particular purpose. Motorola may make 

improvements or changes in the product(s) described in this manual at any time.

MOTOROLA and the Stylized M Logo are registered trademarks of Motorola Trademark Holdings, LLC. 

U-verse is a service mark of AT&T. AT&T ConnecTech is a registered trademark of AT&T. Dolby Digital 

manufactured under license from Dolby Laboratories. Dolby and the double D symbol are registered 

trademarks of Dolby Laboratories. This product incorporates copyright protection technology that 

is protected by U.S. patents and other intellectual property rights. Use of this copyright protection 

technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing 

uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is 

prohibited. Rovi is a protected trademark of Rovi Corporation. HDMI, the HDMI logo and High Definition 

Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other product 

or service names are the property of their respective owners.

This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of 

such technology outside of this product is prohibited without a license from Microsoft Corporation or an authorized 

Microsoft Corporation subsidiary.

Contact Us

For questions about your TV service, call or contact AT&T at:

http://uverse.att.com/support

Summary of Contents for at&t U-verse VIP2500 Series

























Reviews: