Motorola ASTRO XTSTM 5000 Model II User Manual Download Page 118

Page: 118 / 163

ASTRO XTS 5000 Model II

105

ARS User Login and Text Messaging Features

Table 10: TMS Status Symbols

Symbol

Indication

Priority Message

This icon is displayed

• when “Priority” is toggled on before sending the

message.

• in the Inbox folder for messages which are

flagged with “Priority”.

Request Reply

This icon is displayed

• when “Request Reply” is toggled on before

sending the message.

• in the Inbox folder for messages which are

flagged with “Request Reply”.

Inbox Full

This icon is displayed when the Inbox folder is full.

New Message Icon

This icon is displayed when a new incoming
message is received.

Message Sent

This icon indicates that the selected message has
been successfully sent.

Message Unsent

This icon indicates that the selected message was
not successfully sent.

Summary of Contents for ASTRO XTSTM 5000 Model II




































































































































































Search results

Summary of Contents for ASTRO XTSTM 5000 Model II

Reviews:

Related manuals for ASTRO XTSTM 5000 Model II

Brands by name

Popular brands

Motorola ASTRO XTSTM 5000 Model II, User Manual

Search results

Summary of Contents for ASTRO XTSTM 5000 Model II

Reviews:

Related manuals for ASTRO XTSTM 5000 Model II

Brands by name

Popular brands