manualshive.com logo in svg

Motorola ASTRO MT 1500, User Manual

Share
Download
Motorola ASTRO MT 1500 User Manual Download Page 50

38

Special Radio Features

Out-of-Range

If you go out of the range of the system, and can no longer lock onto a 
control channel: 

Site Lock

This feature allows your radio to lock onto a specific site and not roam 
among wide-area talkgroup sites. This feature should be used with 
caution, since it inhibits roaming to another site in a wide-area 
system.

The display shows 

OUT OF 

RANGE

 and the currently selected 

zone/channel combination, and/
or you hear a low-pitched tone. 

AND/OR

• Low-pitched tone

Your radio remains in this out-of-
range condition until it locks onto 
a control channel, or it locks 
onto a failsoft channel, or it is 
turned off.

• Locks onto a control channel, 

or

• Locks onto a failsoft channel, 

or

• Turned off.

1

Press the 

Site Lock/Unlock

 

button.

The current lock state is 
momentarily displayed.

OR

2

Press and hold the 

Site Lock/

Unlock

 button until you see the 

desired lock state.

OR

Your radio’s ID

OUT OF RANGE

SITE LOCKED

SITE UNLOCKED

SITE LOCKED

SITE UNLOCKED

MT1500 1.5 UG.book  Page 38  Thursday, May 8, 2008  11:17 AM

Summary of Contents for ASTRO MT 1500



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands