Motorola ASTRO MT 1500 User Manual Download Page 39

Page: 39 / 82

MT 1500 Model 1.5

Common Radio Features

Emergency

If the top (orange) button is programmed to send an emergency
signal, then this signal overrides any other communication over the
selected channel.

Your radio can be programmed for the following:

• Emergency Alarm

• Emergency Alarm with Emergency Call

• Silent Emergency Alarm

• Emergency Call

Consult a qualified radio technician for emergency programming of
your radio.

Send an Emergency Alarm

An Emergency Alarm will send a data transmission to the dispatcher,
identifying the radio sending the emergency.

With your radio turned on,
press the

Emergency

button. The current zone/
channel is displayed
alternately with

EMERGENCY

the LED lights Red, and a
tone sounds.

If the selected channel does
not support emergency, the
display shows

EMERGENCY

. Select a channel

that does show

EMERGENCY

• Red LED
• Short medium-pitched tone

Note:

To exit emergency at any time, press and hold the

Emergency

button for about a second.

EMERGENCY

NO EMERGENCY

MT1500 1.5 UG.book Page 27 Thursday, May 8, 2008 11:17 AM

Summary of Contents for ASTRO MT 1500



















































































Search results

Summary of Contents for ASTRO MT 1500

Reviews:

Brands by name

Popular brands

Motorola ASTRO MT 1500, User Manual

Search results

Summary of Contents for ASTRO MT 1500

Reviews:

Brands by name

Popular brands