manualshive.com logo in svg

Motorola ASTRO 25 GTR 8000, Manual

The Motorola ASTRO 25 GTR 8000 is a high-performance communication system widely used by professionals in diverse industries. With its advanced features and reliability, this product ensures seamless communication. You can easily access the user manual for the Motorola ASTRO 25 GTR 8000 for free download at manualshive.com.

Share
Download
background image

10

See 

Device Configuration in CSS on page 134

 to program the configurations into the base radio

using CSS.

11

See 

Configuring Centralized Authentication on Devices in VoyenceControl on page 154

 to

program the base radio using UNC.

3.2

General Safety Precautions

WARNING: 

Compliance with FCC guidelines for human exposure to Electromagnetic Energy

(EME) at Transmitter Antenna sites generally requires that personnel working at a site must be
aware of the potential for exposure to EME, and can exercise control of exposure by
appropriate means, such as adhering to warning sign instructions, using standard operating
procedures (work practices), wearing personal protective equipment, or limiting the duration of
exposure. For more details and specific guidelines, see “Appendix A” of the Motorola Solutions

Standards and Guidelines for Communications Sites

 manual.

Installation guidelines for compliance with RF exposure regulations

This equipment must be installed and operated at a fixed location, in compliance with all applicable
code requirements. The antenna installation must comply with all applicable building and safety codes.
In order to ensure optimal communication performance and compliance with applicable RF exposure
limits, it is recommended that the antenna is installed outside the building hosting this equipment, on
the roof or on a tower if at all possible.

It is the licensee or site owner responsibility to establish an RF exposure safety program meeting the
applicable regulatory requirements concerning RF exposure of working personnel and the general
public, implementing actions such as site survey measurements and computational analysis, signage
and barriers, site access restrictions, as needed.

General safety precautions during all phases of operation, service, and repair

Observe the following general safety precautions during all phases of operation, service, and repair of
the equipment described in this manual. Follow the safety precautions listed and all other warnings and
cautions necessary for the safe operation of all equipment. See the appropriate section of the product
service manual for additional pertinent safety information. Due to the danger of introducing additional
hazards, do not install substitute parts or perform any unauthorized modifications of equipment.

NOTICE: 

The installation process requires preparation and knowledge of the site before

installation begins. Review installation procedures and precautions in the Motorola Solutions

Standards and Guidelines for Communications Sites

 manual before performing any site or

component installation.

Always follow all applicable safety procedures, such as Occupational Safety and Health Administration
(OSHA) requirements, National Electrical Code (NEC) requirements, local code requirements, and safe
working practices. Also, all personnel must practice good judgment. General safety precautions include
the following:

• Read and follow all warning notices and instructions marked on the product or included in this

manual before installing, servicing, or operating the equipment. Retain these safety instructions for
future reference.

• If troubleshooting the equipment while power is on, be aware of the live circuits.

• Do not operate the radio transmitters unless all RF connectors are secure and all connectors are

properly terminated.

• Ground all equipment properly in accordance with the Motorola Solutions 

Standards and Guidelines

for Communications Sites

 manual and specified installation instructions for safe operation.

• Slots and openings in the cabinet are provided for ventilation. Do not block or cover openings that

protect the devices from overheating.

MN003286A01-E

Chapter 3:  GTR 8000 Base Radio Installation

  83

Summary of Contents for ASTRO 25 GTR 8000






















































































































































































































































































































Reviews:

No comments

Related manuals for ASTRO 25 GTR 8000

Y-cam Camera Assembly Instructions Manual preview
Camera
Brand: Y-cam Pages: 12
Panasonic LJ-SK56A Quick Start Manual preview
LJ-SK56A
Brand: Panasonic Pages: 2
Garmin NEO Owner'S Manual preview
NEO
Brand: Garmin Pages: 14
J-Top COMPACT Instructions preview
COMPACT
Brand: J-Top Pages: 2
Paradyne COMSPHERE 6800 Series Installation And Enabling/Disabling Instructions preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 7
Klarstein 10032883 Instructions Manual preview
10032883
Brand: Klarstein Pages: 24
SpectraLink Link 150 M3 Installation Manual preview
Link 150 M3
Brand: SpectraLink Pages: 14
COOLFORT CF-0233 Manual Instruction preview
CF-0233
Brand: COOLFORT Pages: 16
hepco & becker 6304567 00 01 Quick Start Manual preview
6304567 00 01
Brand: hepco & becker Pages: 4
Veho VFS-004 deluxe User Manual preview
VFS-004 deluxe
Brand: Veho Pages: 37
Vega VEGAFLEX 65 Operating Instructions Manual preview
VEGAFLEX 65
Brand: Vega Pages: 56
Kask PLASMA AQ Use And Care Booklet preview
PLASMA AQ
Brand: Kask Pages: 68
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
Jetter JXM-MUX User Manual preview
JXM-MUX
Brand: Jetter Pages: 38
National Cycle N936 Owner'S Manual preview
N936
Brand: National Cycle Pages: 2
Parkside 270423 Operation And Safety Notes preview
270423
Brand: Parkside Pages: 16
Yongnuo RF-603 II User Manual preview
RF-603 II
Brand: Yongnuo Pages: 32
Screen Technics ELECTRICINEMA Manual preview
ELECTRICINEMA
Brand: Screen Technics Pages: 19

Brands by name

Popular brands

Load more brands