manualshive.com logo in svg

Motorola APX4000 XH, User Manual, Page: 152 / 204

Share
Download
Motorola APX4000 XH User Manual Download Page 152

The radio starts pairing to the device.

To continue with Bluetooth pairing, please see 

Pairing

with Low Frequency-Motorola Proximity Pairing (LF-
MPP) Feature

 on page 145.

Turning Bluetooth Visibility On

Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The
visibility of the Bluetooth is set to off by default.

The following methods are options on how to turn
Bluetooth visibility on. The result of all the methods is
the same. You can use the options interchangeably
depending on your preference and the programmed
functions.

•

Turn Bluetooth visibility on via radio menu 

BT

:

a)

 or   to 

BT

. Press the 

Menu Select

 button

directly below 

BT

 to access the Bluetooth

feature screen.

b)

 or 

 to 

Visibility

 and press the 

Menu

Select

 button directly below 

On

.

The status changes to 

Visible to all

.

Visibility mode is enabled.

When the timer expires, the status changes to

Visibility failed

. Repeat the procedure to

turn Bluetooth visibility on.

•

Turn Bluetooth visibility on via the preprogrammed
button.

a) Press the preprogrammed button to enable the

Bluetooth visibility feature.
You hear a short, medium-pitched tone. The
display shows momentary 

Visible to all

.

Visibility mode is enabled.

When the timer expires, the display shows
momentary 

Visibility failed

. Repeat the

procedure to turn Bluetooth visibility on.

Note: 

Press the preprogrammed to toggle the

Bluetooth visibility on or off.

Receiving Pairing Request from other Devices

When your radio receives a pairing request from
other device, the display shows 

<Device Friendly

Name>pair request

.

Press the 

Menu Select

 button below 

Ok

 to accept

or 

Cncl

 to refuse pairing request.

Advanced Features

148

English

Summary of Contents for APX4000 XH













































































































































































































Reviews:

No comments