manualshive.com logo in svg

Motorola APX Mobile, User Manual, Page: 129 / 146

Share
Download
Motorola APX Mobile User Manual Download Page 129

Advanced Features

English

111

Using Optional External Alarms (Horn and 

Lights)

All control heads can be equipped for external alarms (horn and 
lights) that are activated when a Call Alert page, Private 
Conversation call, or phone call is received.

The radio always powers up with the horn and lights feature 
enabled.

Note:

The horn and lights feature must be enabled by a 
qualified radio technician.

Using Non-Permanent Horn and Lights

Procedure:

1 Press the 

Menu Select 

button directly below 

H/L

 

momentarily. The last selected alarm(s) are enabled, and 
the display shows the enabled alarm(s) alternating with the 
selected mode, until it is turned off.

2 Press the 

Menu Select 

button directly below

 H/L

 

momentarily to turn off the alarm(s). The display shows 

Horn/Lites off

.

Using Permanent Horn and Lights

If Permanent Horn and Lights is enabled, horn and lights will 
automatically be turned on when the radio powers up.

Procedure:

1 Press the 

Menu Select 

button directly below 

H/L

 once to 

turn off the alarm(s).

2 Press the 

Menu Select 

button directly below 

H/L

 

momentarily to enable the last selected alarm(s). 
The display briefly shows the enabled alarms, and then 

reverts back to the selected mode

.

Summary of Contents for APX Mobile



















































































































































Reviews:

No comments