manualshive.com logo in svg

Motorola APX MOBILE O3 CONTROL HEAD, User Manual

Share
Download
Motorola APX MOBILE O3 CONTROL HEAD User Manual Download Page 79

If the 

Top (Orange)

 button is preprogrammed to send

an emergency signal, this signal overrides any other
communication over the selected channel.

Your radio supports the following Emergency modes:

• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
• Special Considerations for Emergencies

Check with your dealer or system administrator for
more information on the programming of this feature.

Only 

one

 of the Emergency modes above can be

assigned to the preprogrammed 

Emergency

 button

or the 

Emergency

 footswitch.

Note:

To exit emergency at any time, press and hold
the preprogrammed Emergency button for
about a second. This timer is programmable
from 0 – 6250 milliseconds by a qualified
technician.

Sending an Emergency Alarm

This feature allows you to send a data transmission,
which identifies the radio sending the emergency, to
the dispatcher.

1

Press the preprogrammed 

Emergency

 button.

A tone sounds and the display alternates

Emergency

 and the home display. A dispatcher

acknowledgment 

Ack received

 display follows.

For trunking system, the radio also sounds a high-
pitched tone that indicates the alarm has been
received by the trunked system’s central
controller.

2

Press and hold the 

EMERGENCY

 button or the

PTT

 button to return to normal operation.

Sending an Emergency Call (Trunking Only)

This feature gives your radio priority access to a
talkgroup.

1

Press the preprogrammed 

Emergency

 button.

One of the following scenarios occurs:

• A tone sounds and the display alternates

Emergency

 and the home display.

Advanced Features

75

English

Summary of Contents for APX MOBILE O3 CONTROL HEAD

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands