manualshive.com logo in svg

Motorola APX MOBILE O3 CONTROL HEAD, User Manual

Share
Download
Motorola APX MOBILE O3 CONTROL HEAD User Manual Download Page 14

Software Version

All the features described in the following sections are
supported by the software version 

R14.00.00

 or later.

See 

Accessing the Radio Information

 on page 131 to

determine the software version of your radio.

Check with your dealer or system administrator for
more details of all the features supported.

Notice to Users (FCC and Industry Canada)

This device complies with Part 15 of the FCC rules
and RSS 210 of the Industry Canada rules per the
following conditions:

• This device may not cause harmful interference.
• This device must accept any interference

received, including interference that may cause
undesired operation.

• Changes or modifications made to this device, not

expressly approved by Motorola, could void the
authority of the user to operate this equipment.

Software Version

10

English

Summary of Contents for APX MOBILE O3 CONTROL HEAD

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands