manualshive.com logo in svg

Motorola APX 4000, User Manual

Share
Download
Motorola APX 4000 User Manual Download Page 10

Turning Voice Mute On or Off...........140

Using the Time-Out Timer.................140

Time and Date Setup........................141

Using Conventional Squelch

Operation Features......................142

Using the PL Defeat Feature............ 142

Digital PTT ID Support......................143

Smart PTT Feature (Conventional

Only)............................................ 143

Transmit Inhibit................................. 144

IMPRES Battery Annunciator............145

General Radio Information................146

Helpful Tips.................................. 149

Radio Care...................................................149

Cleaning Your Radio.........................150

Preparation for Washing the Radio

and Parts..................................... 151

Proper Ways to Handle the Radio.... 151

Radio Service and Repair.................151

Battery Care.................................................152

Battery Charge Status.......................152

Battery Recycling and Disposal........ 153

Accessories..................................154

Maritime Radio Use in the VHF

Frequency Range..................... 155

Special Channel Assignments.....................155

Emergency Channel......................... 155

Operating Frequency Requirements............155

Declaration of Compliance for the Use of

Distress and Safety Frequencies............158

Technical Parameters for Interfacing

External Data Sources............................158

Glossary........................................159

Limited Warranty..........................165

MOTOROLA COMMUNICATION

PRODUCTS........................................... 165

I. WHAT THIS WARRANTY COVERS

AND FOR HOW LONG:......................... 165

II. GENERAL PROVISIONS:....................... 166

III. STATE LAW RIGHTS:............................166

Contents

6

English

Summary of Contents for APX 4000
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands