viii
ACC/RTB-735R2/736R2
Revision History
SAP No.
Revision
Date
Description
215948
AA
October 2001
Preliminary Installation Guide
215948
AB
May 2002
Added the “Abbreviations” section on
page vii
Rephrased several safety notes in the
“Safety Notes” chapter and the “Sicher-
heitshinweise” chapter
Added safety note on high humidity and
condensation in “Operation” section on
page xii and “Betrieb” section on page xvi
Deleted information that splitter cable is
part of accessory kit in “Introduction” sec-
tion on page 1-3 and “PS/2 Keyboard or
Mouse” section on page 1-23
Changed information on PENT/CPCI-
735R2/736R2 Family board communica-
tion from P4 to P3 in “Introduction” sec-
tion on page 1-3
Removed figure “Board Overview” in
“Introduction” section on page 1-3
Added Figure 1 “Location of IPMB1 and
ICMB Connectors” page 1-3
Deleted EN 50081-2 and EN 50082-2 from
and added EN 55022, EN 55024, and EN
61000-6-2 to the “Standard Compliances”
section on page 1-5
Revised “Action Plan” section on page 1-6
Revised Figure 2 “On-Board Connectors”
page 1-7
Corrected switch settings in “Secondary
EIDE Interface” section on page 1-7,
“Flash Disk” section on page 1-8, and
“Switch Settings” section on page 1-14
Replaced “CompactPCI Flash” with
“CompactFlash” in Figure 4 “Location of
CompactFlash Slot” page 1-9
Added information on connector type in
“Intelligent Peripheral Management Bus”
section on page 1-11
Revised Figure 12 “Connecting RTB to
Backplane” page 1-16
Added RTB-736R2 front panel to
Figure 19 “Front Panel Connectors and
Controls” page 1-21
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
