Switch Settings
Installation
1 - 14
ACC/RTB-735R2/736R2
Switch Settings
Caution
The RTB provides the configuration switch SW3 which functions are
reserved. The switches have to be set to OFF to avoid damage to attached
PMC modules. Therefore, never change the settings of SW3.
Figure 11:
Location of Switches
Table 1:
Switch Settings
Switch
No.
Description
SW3
1
Reserved, must be OFF (default)
2
Reserved, must be OFF (default)
SW4
1
Reserved, must be OFF (default)
2
ON: Flash disk is master
OFF: Flash disk is slave (default)
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
