Motorola A840 - Cell Phone - CDMA2000 1X, Service Manual, Page: 31 / 56

6809485A78-O June 07, 2004 33
Level 2 Service Manual Disassembly
Removing and Replacing the Keypad Bezel
1. Remove the battery cover, battery, and antenna, as described in the
procedures.
2. Turn the phone over and carefully insert the disassembly tool under the keypad
bezel and gently bend the bezel outward from the rear housing to release the
2 snaps on the side of the housing (See Figure 13).
3. Repeat step 2 for the other side of phone.
4. When all four snaps have been released, carefully lift the keypad bezel away
from the phone.
5. To replace, align the keypad bezel with the phone housing.
6. Carefully press the keypad bezel into the phone housing until the snaps engage.
7. Replace the antenna, battery, and battery cover as described in the procedures.
040346o
Figure 13. Removing the Keypad Bezel
2 snap locations
each side
keypad bezel