manualshive.com logo in svg

Motorola A1000, Service Manual

Share
Download
Motorola A1000 Service Manual Download Page 30

26

 

October 4, 2004 

6809490A77-O

Disassembly

 A1000

Removing and Replacing the Navigation Buttons

To Remove the Navigation Buttons

1.

Ensure the phone is turned off.

2.

Remove the battery door.

3.

Remove the battery.

4.

Remove the USIM.

5.

Remove the rear housing.

6.

Remove the transceiver board.

7.

Use the plastic tweezers to grasp the button assembly and lift it out of the front 
housing.

To Replace the Navigation Button Assembly

1.

Align the navigation button assembly with the opening in the front housing 
and press into place.

2.

Ensure that the alignment holes on the button assembly fit over the alignment 
pins on the front housing (there are a total of 6 alignment pins).

3.

Replace the transceiver board, rear housing, USIM, battery, and battery door 
as described in the procedures.

Figure 12. Removing the Navigation Button Assembly

Alignment

Pins

Tweezers

Front
Housing

Summary of Contents for A1000





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands