background image

12 

the time for fresh food to be stored. 

Note: Once the refrigerator is used, you’d better use it continuously; and under normal 

circumstances, do not stop its use, so as not to affect the service life. 

 

Defrosting 

This appliance is designed with automatic defrosting function, thus no need to defrost it manually. 
 

Changing the lamp 

The LED lamp is used by the refrigerator for lighting, which has low energy consumption and long service life. In 
case of any abnormality, please contact the brand helpdesk.​

 ​

The lamps can only be replaced by the brand qualified 

service engineer, together with a part of the appliance. 
 

Safety-check after maintenance 

Is the power cord broken or damaged? 
Is the power plug firmly inserted into the socket? 
Is the power plug abnormally overheating? 

Note: Electric shock and fire accident may be caused in case the power cord and plug is damaged or 

stained with dust. If any abnormality is observed, please unplug the power plug and get in contact with the 
brand helpdesk. 
 
How to disassemble the parts. 

Fridge door bottle rack / pockets:  
Hold the bottle rack with both hands, and then push it up. 

 

Fridge shelf: 
Hold one end of the shelf, and lift it up while pulling it outwards. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

12 

Summary of Contents for 592HSMTB




















Reviews: