Motorola 100IP-2, User Manual

Page: 15 / 65

Speakerphone -or press Line button for the appropriate line,
-or press End
Hang up while using the
Headset
--Press Handset button,
（
Do not keep the headset mode) ,
-or press End (keep the headset mode)
Hang up one call, but
preserve another call on
the other line
--Press End ,
-or refer to the above three methods
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at anytime, and the other lines
would be hold. As a result of that, you can switch different calling line on our phone.Note:If the
phone isn’t have the hold button, pls using the soft key.
If you want to... Then...
Put a call on hold --Press HOLD button,
-or press soft key
Hold a line and switch to
another line
Press another Line button for the appropriate line
Resume a call on current
line
--Press Line button,
Release a call on different
line
Select the line want to release hold, press the line, so recovery;
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow-green and flashing Line button or Hold in the LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the
call.
Talk to the transfer
recipient before
transferring a call
--1) Press TRANSFER button or press XFER;
--2) Enter number;
--3) press “ #”
（
default) ,
Motorola