Motorola solutions WP300 PMLN8298, User Manual

Page: 9 / 198

Audio/Bluetooth Indication Description
Blinking in green Receiving incoming call
NOTE: Microphone is muted and incoming call indication is not applicable when function
as a standalone PTT device.
Table 6: Status Indication
Indicator Indication Description
Audio/Bluetooth Double-blinking blue Connected
Power Double-blinking green Battery level is high
Double-blinking amber Battery level is medium
NOTE: To determine the detail status of the Pod, short press the Power button.
Table 7: Operation Mode Indication
Indicator Indication Description
Bluetooth and Power LED Both LEDs blink red si-
multaneously. Operation mode error
The Bluetooth LED blinks
blue twice and the Power
LED blinks green twice si-
multaneously. POD is entering or exiting Dark Mode
Refer to Switching the Operation Mode for proper operation mode setup.
2.1.3
Micro-USB Charger
This section provides information on using the Micro-USB Charger.
• The Micro-USB charger is a handy port that allows you to conveniently charge your battery.
• Make sure that your device is turned Off.
• Plug the Micro-USB cable into the Micro-USB charging port on your device.
• Connect the USB Charger to a nearby and easily accessible wall power outlet.
CAUTION:
Hold the USB connector when plugging in and out. Do not pull the cable.
Do not twist the dust cover.
2.2
Attaching Intergrated Microphone/Receiver Headset (Earpiece)
Procedure:
1 To attach and lock the earpiece, align the unlock symbol on the connector and push the
connector in and turn the connector until the lock symbol is aligned.
MN007883A01-AA
Chapter 2: Getting Started
7