Sarix Professional 4 Bullet Camera Installation Manual
C6726M | 11/22
13
The camera will reserve the 10.11.22.32/28 subnet for internal use while the USB Wi-Fi Adapter is
plugged in.
Assigning an IP Address
The device automatically obtains an IP address when it is connected to a network.
If the device cannot obtain an IP address from a DHCP server, it will use Zero Configuration Networking
(Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the 169.254.0.0/16
subnet.
The IP address settings can be changed using one of the following methods:
l
The mobile web interface using the USB Wifi Adapter. For more information, see
.
l
Device's web browser interface: http://
<camera IP address>/
.
l
Network Video Management software application.
l
ARP/Ping method. For more information, see
Setting the IP Address Using the ARP/Ping Method
Setting the IP Address Using the ARP/Ping Method
Complete the following steps to configure the camera to use a specific IP address:
Note
: The ARP/Ping Method will not work if the
Disable setting static IP address through
ARP/Ping method
checkbox is selected in the camera's web browser interface. For more
information, see the Pelco Sarix Professional 4 Bullet Camera Operations Manual.
1. Locate and make note of the MAC Address (MAC) listed on the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following commands:
a.
arp -s
<New Camera IP Address> <Camera MAC Address>
For example:
arp -s 192.168.1.10 00-18-85-12-45-78
b.
ping -l 123 -t
<New Camera IP Address>
For example:
ping -l 123 -t 192.168.1.10
3. Reboot the camera.
4. Close the Command Prompt window when you see the following message:
Reply from
<New Camera IP Address>
: ...
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
l
The mobile web interface using the USB Wifi Adapter. For more information, see
.
l
Web browser interface: http://
< camera IP address>/
.
l
Network Video Management software application.
