Motorola solutions NNTN6899, User Manual, Page: 14 / 184

12
En
glish
3. Pull out the locking plates at the two sides to align with
the charger’s base screw holes.
4. Assemble two pieces of M4 screws (included in the
package through the locking plates into the charger
base as shown in the picture below. Do not overtighten
the screws.
Mounting holes
Mounting hardware
(Not included)
Wall Mount Bracket
Note: The Charger Base Tray
can also be mounted with the
Wall Mount Bracket
(NNTN6844).
M4 Screw
(Included)
Locking
Plates