Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 89 / 170

Chapter 3
PRX 7000 Console Proxy Setup and
Installation
This chapter provides information and activities associated with the setup and installation of the PRX
7000 Console Proxy. This chapter also includes setup verification information and activities,
maintenance and troubleshooting, and field replacement unit information, and disaster recovery
information to support the PRX 7000 Console Proxy.
PRX 7000 Console Proxy Software and Hardware Requirements
The PRX 7000 Console Proxy requires a Windows-based computer or workstation running a 64-bit
version of Windows 7 Professional operating system with an approved service pack. The server must
also conform to the minimum supported hardware specifications of an MCC 7500 Dispatch Console
when running in a cohab environment. See the
MCC 7500 Dispatch Console with Voice Processor
Module manual for details.
NOTICE: The HP Z420 is the recommended workstation to use for the PRX 7000 Console
Proxy. See Table 8: Hardware Specifications for HP Z420 Workstation on page 39 for details.
PRX 7000 Console Proxy Cohab with MCC 7500 Installations
The PRX 7000 Console Proxy can be installed as a standalone product or cohabited with an MCC
7500 Dispatch Console (Voice Processor Module (VPM)-based) installation inside the ASTRO
®
25
Radio Network Infrastructure (RNI). Either or both can be installed with no impact to performance. See
the
MCC 7500 Dispatch Console with Voice Processor Module manual for MCC 7500 Dispatch
Console installation procedures.
WARNING: The PRX 7000 Console Proxy installation does not allow the console proxy to be
installed cohabited with an MCC 7100 IP Dispatch Console installation (or the other way
around).
Setting Up the PRX 7000 Console Proxy
This process provides the order in which the components associated with the PRX 7000 Console
Proxy must be installed and/or configured.
Process:
1 Install the recommended Windows 7 operating system, as follows:
a
Run the Motorola OS Installer (MOSI). See Windows Installation and Motorola Operating
System Installer for PRX 7000 Console Proxy on page 90 .
b Configure the computer power settings. See Setting Windows Power Options on page 47 .
2 Generate License Certificates for the PRX 7000 Console Proxy. See Generating License
Certificates for the PRX 7000 Console Proxy on page 91 .
3
Install PRX 7000 Console Proxy software. See Installing the PRX 7000 Console Proxy Software
on page 92 .
4
Configure black list of remote MCC 7100 IP Dispatch Console. See Adding a Remote MCC
7100 IP Dispatch Console to the Black List on page 126 .
MN000672A01-E
PRX 7000 Console Proxy Setup and Installation
Send Feedback 89