Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 90 / 170

5
Optional: Install MOTOPATCH. See MOTOPATCH Installation on page 61 .
6 Install Supplemental CD. See Windows Supplemental Configuration (K Core) on page 93 .
7 Configure Network Interface Card (NIC) on computer or server inside the ASTRO
®
25 Radio
Network Infrastructure (RNI). See Configuring the Computer Network Interface Card for the PRX
7000 Console Proxy on page 94 .
8
Setup the Active Directory Domain for the console site. See Setting Up the Domain for the PRX
7000 Console Proxy on L and M Core on page 95 .
Operating System Installation for the PRX 7000 Console Proxy
Before installing the PRX 7000 Console Proxy software, update the current Windows operating system
with Windows 7 Professional with an approved service pack.
Windows Installation and Motorola Operating System Installer for
PRX 7000 Console Proxy
Workstations purchased from Motorola are imaged with the correct Windows 7 operating system and
approved service pack. All required drivers are configured and installed.
To install a fresh Windows Operating System (OS) with an approved service pack on a workstation,
use the following DVDs provided by Motorola:
• Motorola Operating System Installer (MOSI) 64-bit installation media
• Windows 7 Professional 64-bit OEM media with the appropriate service pack
The MOSI media supports both local and over-the-network Windows OS installation and configuration
that minimizes the wait time that you normally experience when performing the installation.
The MOSI media is updated periodically to provide continual support for installations on computers
supported by MOSI. To install the Windows OS, use the MOSI media that came with your system or, if
necessary, use an updated version of this installation media. Information on using MOSI is available on
the Motorola Online (MOL) web portal. See the MOSI media label or
readme.txt
for information
regarding the access to MOL.
Setting Windows Power Options
Set the power options for the Windows operating system correctly to ensure uninterrupted operation.
See the Windows documentation or the computer manufacturer documentation for information
regarding the steps for setting power options. The steps in this procedure may not reflect recent
updates to the operating system. For installations on HP laptop/workstation, disable the “HP Power
Assistant Service”. See the relevant HP documentation for details.
Procedure:
1
In the
Control Panel
of the Windows operating system, navigate to the
Power Options
pane.
2
For the
Balanced (recommended)
plan, click
Change plan settings
.
3 Click Change advanced power settings .
The Power Options window appears.
4 Expand Hard disk
→
Turn off hard disk after and perform one of the following actions:
• If you use a laptop, from the
On battery
and
Plugged in
lists, select
Never
.
• If you use a desktop computer, from the
Setting
list, select
Never
.
5 Expand Sleep
→
Sleep after and perform one of the following actions:
MN000672A01-E
Chapter 3: PRX 7000 Console Proxy Setup and Installation
90 Send Feedback