Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 46 / 170

When you name a laptop during the installation of the Windows 7 operating system, adhere to the
following restrictions:
• Minimum length: 2 characters
• Maximum length: 49 characters
• Allowed numbers: [0–9]
• Allowed English letters: [a-z A-Z]
• Allowed special characters: period or decimal point (.) and hyphen or minus sign (–)
• No leading and trailing spaces
If you use your laptop for the installation, you are responsible for installing all required drivers.
Configuring Windows Components
The general configuration of Windows 7 components is applicable for all MCC 7100 IP Dispatch
Console installations, inside or outside the ASTRO
®
25 Radio Network Infrastructure (RNI).
Prerequisites:
Before you install the MCC 7100 IP Dispatch Console software, configure the general Windows 7
Professional operating system components.
Install the required Windows 7 operating system with an approved service pack . See
Windows
Installation and Motorola Operating System Installer for MCC 7100 IP Dispatch Console on page 45 or
contact the Motorola Solution Support Center (SSC).
Process:
1 Set display properties. See Setting Display Properties on page 46 .
2 Set power save properties. See Setting Windows Power Options on page 47 .
3
Set up SNMP services. See Setting Up SNMP Services Inside the ASTRO RNI on page 48 .
4 Configure SNMP Components for a console inside the ASTRO
®
25 RNI. See Configuring
Windows SNMP Components for a Console Inside the ASTRO RNI on page 48 .
5 Configure primary DNS suffix. See Configuring Primary DNS Suffix on page 49 .
Setting Display Properties
The settings for screen resolution and color is dependent on the video adapter install on the computer.
See the Windows 7 documentation or the computer manufacturer documentation for assistance with
changing display settings.
Procedure:
1 In the Control Panel of the Windows operating system, navigate to the Screen Resolution
pane.
2
In the
Resolution
drop-down menu, set the resolution to
1024x768
or greater.
The available options depend on the installed video adapter.
3
Click
Advanced settings
.
4
In the
Monitor
tab, from the
Colors
drop-down list, select
True Color (32 bit)
.
5 Click OK on all subsequent windows.
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
46 Send Feedback